Upvc Door Lock Replacement
Making sure you are secure in your property doesn't need to be difficult. With just a few tools and some knowledge, you can do the replacement of your door lock from upvc on your own.
The first step is to determine the type of upvc lock mechanism you are using. This will allow you to identify a replacement for it that fits precisely.
How to go about it
The replacement of the door lock made of Upvc will help secure your home. This is particularly true for those who live in a region that is susceptible to break-ins. Utilizing high-end locks, like the euro cylinder lock can prevent burglaries by providing a sturdy barrier that's difficult for intruders to penetrate. It's not enough just to install the best locks. Regular maintenance and monitoring your doors can also aid.
Changing your uPVC locks isn't an overwhelming task, however you'll require some expertise. If you're not sure you can do it yourself, it's best to hire an expert.
Before you start, you need to identify the type of uPVC lock that's installed on your door. This will help you find an alternative. Avocet is a popular brand, as are Fulltex GU Ferco Mila Roto Yale and Fulltex GU Ferco.
It is necessary to prepare the lock for installation once you have located it. This involves unscrewing the long screw at the bottom of the cylinder. This can be done with the help of a screwdriver, however it is recommended to make use of a power drill for this job.
Once the long screw has been removed, you are able to remove the old cylinder from the door handle. The lock cam will be exposed. The new cylinder for the lock should be screwed into the correct position. Once it's in position then tighten the bolt on the lock cylinder, and screw the door handles back into their positions.
This is an easy task, and it shouldn't take more than five minutes to complete. Check the lock after you've completed the steps to ensure that it works properly.
Tools
It's probably time to replace your upvc lock if it starts acting like one of those erratic, annoying friends who works one day but then becomes an absolute pain the next. It's a good idea to do so if you want to protect your home from burglars, as an unreliable lock could make your home vulnerable to burglars.
The process of changing a multipoint upvc lock might seem like a daunting task however, it's actually very simple and much less expensive than having locksmiths to do it for you. You only need to be aware of signs that the lock must be replaced and have some basic tools on hand.
You'll need a screwdriver, a wrench and possibly a small ratchet or spanner for the job. You also need to be aware of the dimensions of the cylinder lock you have and take a number of measurements including the backset. This is the distance between the centre of the cylinder and the door handle. Based on the type of multipoint lock made of upvc, it could be 45mm or 35mm.
If you've got all the tools you need, you can remove the old lock, then install the new one, and then screw it back in. Check the lock after you're done, to make sure it locks. It is possible to test this inside and outside the home with the key.
It is also a good idea to clean the mechanism on a regular basis and then lubricate it. Use a damp cloth for cleaning the mechanism and lubricate it each six months with a PTFE or graphite-based grease. (Do not use oil because it can attract dust.) If patio door lock replacement continues to be not working after these steps then it's the time to contact locksmith.
Measurements
A upvc lock is a vital security feature that can protect your home and stop unauthorised entry. A defective lock can be identified by a difficult time inserting the key, a resistance in the handle, visible damage and an irregular latch function. It is good to know that replacing your upvc lock is fairly simple and straightforward with the right tools and careful measurements. Regular maintenance, for example, cleaning and oiling your upvc lock could also extend its lifespan.
It is important to accurately measure in millimetres when determining what kind of replacement lock you require. You will need to know both the PZ and backset dimensions. The PZ dimension is measured from the centre of the hole in the spindle to the top diameter hole of the barrel of the lock. The backset is the distance that runs from the front of the face plate to the centre of the hole in the spindle.
Regardless of the kind of upvc lock you have, it is important to ensure that it is of high-quality to enhance your home's security. An ideal choice is an anti-snap lock that can mitigate the risk of snapping upvc locks and offer greater security to traditional locks.
Upgraded handles are a different way to improve the security of your upvc doors. By investing in a Sold Secure SS301 approved set of security handles or a Kitemark 2* set can significantly boost the security of your door. You can find a full range of these products in our online store. If you prefer, you can visit our showrooms to view our wide range of locks in person. Our experts are available to answer any questions you have regarding your home's security requirements. You can also browse our blog for tips on how to ensure your home's security.
Replacement parts
It is best to hire an expert locksmith to replace the uPVC lock that has failed mechanically. This will ensure the job is done right and your home is secure from intruders. Checkatrade can help you find the nearest locksmith.
The first step in uPVC door lock replacement is to determine the correct size for the new lock. This can be accomplished by measuring the distance from one end of the keyhole to the other. The measurement is typically in millimeters, and is referred to as the backset. There are two more important measurements to consider - screw to spindle and front plate length.
Once you have the proper dimensions, order the replacement parts. You'll also need to remove the screw that holds the faceplate to the lock cylinder. You can remove this with the help of a screwdriver or wrench. Once you have removed the screw, the cylinder will come loose with moderate tugging.
The next step is to determine what kind of centre case that you own. You will need a centre case that has an deadbolt, a hook and latch or a deadbolt with a lock cylinder.
After you have identified the type of central case you have, you'll have to buy an additional lock barrel that is compatible with. After purchasing the new barrel, you will have to insert it again into the handle socket. Then, you will need to place the handles back on and thread the spindle into the handle socket. Test the new cylinder when you have completed the process to ensure it is working properly.
Installation
A Upvc lock is a great option to protect your home from burglaries. To ensure maximum security the lock mechanism needs to be maintained regularly to ensure it functions properly. Regular cleaning using a damp cloth and periodic lubrication with an anti-dust product such as graphite powder or PTFE oil, will help to keep your home safe.
It might be difficult to change the lock mechanism on your door made of upvc, but you can do it yourself for only a fraction of the cost of hiring a professional locksmith. Understanding how the process is carried out is crucial. Take your time and follow the steps carefully.
Start by identifying the type of lock you have on your door made of upvc. If you know the brand you can purchase a replacement lock that matches at the local hardware store. Find the main dimensions of the old lock mechanism to ensure you get the perfect fit (you could use this as a reference when you purchase your new lock).
Remove the handle to open the door. Find the screw that holds the lock faceplate on, and use it to release it from its mount. Gently wiggle the lock mechanism out of the door, then unbolt the handle and disconnect the cable. Take the cylinder out, and screw the replacement in making sure not to lose any pins.
Install the new lock mechanism inside the door, screw it into place and tighten the handles. Check the door after the assembly is complete by inserting the euro cylinder key, and ensuring that it turns smoothly. You can also re-screw the barrel screw, and then tighten the cable.